CutBack Bitumen (CB)


Product Introduction

 Cutback Bitumens are produced by blending bitumen with suitable petroleum solvents. The temporary reduction in viscosity caused by the solvent allows the binder to be applied in certain construction operations and at lower temperatures. After application, the solvent gradually evaporates, leaving the residual bitumen to perform as the binder.

Key Features

 Lower viscosity compared with the base bitumen

 Suitable for application at lower temperatures

 Controlled solvent evaporation rate depending on the cutback grade

Advantages

 Easy application, spreading, and penetration

 Suitable for certain road maintenance and repair operations

 Applicable where intensive heating is undesirable

 Compatible with a range of road construction and surface treatment applications

Applications

 Prime Coat

 Surface Treatment

 Road Maintenance Operations

 Certain surface coating applications


قیرهای محلول

شرکت نفت پاسارگاد

  • قیرهای زودگیر یا تندگیر (RC):
     اگر از بنزین برای حل كردن قیر خالص استفاده شود، قیر محلول را زودگیر می نامند. زیرا حلال موجود در قیر در مدت كمی بعد از مصرف قیر محلول، تبخیر شده و قیر اصلی بر جای می ماند.

  • قیرهای كندگیر (MC):
     قیرهای كندگیر از حل كردن قیر خالص در نفت سفید تهیه می شود، كه سرعت تبخیر نفت از بنزین كندتر و طولانی تراست.

  • قیرهایقیرهای دیرگیر (SC):
     قیرهای محلول دیرگیر را علاوه بر حل كردن قیر خالص در روغنها و حلالهای دیرگیر نفتی، مانند گازوئیل یا نفت سیاه، می توان مانند قیرهای خالص، مستقیمًا از تقطیر نفت خام بدست آورد كه در حالت اخیر، هنوز روغنهای حلال از آن جدا نشده است. گیرش كامل این قیرها بعد از مصرف ، مدت زمان زیادی طول می كشد.